|
西门子SKP10...系列燃气阀门执行器 |
SKP10...系列燃气阀门执行器
品牌:SIEMENS(西门子)
产地:德国 |
产品介绍 |
Electrohydraulic actuators featuring delayed opening and rapid closing.
The electrohydraulic SKP10... actuators open slowly and close rapidly. All types of VG... gas valves can be combined with the available types of actuators. The actuator is fitted to the valve body by means of the 4 screws contained in the terminal compartment. The square flange can be turned in steps of 90°, thus providing 4 different mounting positions. The actuator can be fitted or replaced while the valve is under pressure. Sealing materials are not required.
The actuator’s hydraulic drive system consists of a cylinder filled with oil and an electric oscillating pump with piston and relief valve. The relief valve is located in the bypass between the suction and pressure side of the pump. With the actuators of the B-series, it is a valve hydraulically actuated by the pump pressure; with the 2-stage actuators of the A-series, it is a normally open solenoid valve. The cylinder carries a seal which hydraulically separates the inlet from the outlet side of the pump, also serving as a guidance for the piston. The piston is also guided by a rod which is rigidly connected to it. This rod transfers the piston’s travel directly to the valve stem. The rod is provided with a disk the position of which is visible through a window in the console (indication of stroke).
Using a lever system, the disk also actuates
the auxiliary switch for indicating the fully closed position, or
other positions, as well as the limit changeover switches for positioning the lowand high-fire stroke with the two-stage actuators.
The switching points of these switches are adjustable over the entire stroke. The adjusting screws are located in the terminal compartment. |
型号表 |
AC100...110V |
AC220...240V |
描述 |
SKP10.110B17 |
SKP10.110B27 |
单段火打开和关闭;没有限位和辅助转换开关 |
|
SKP13.110B27 |
SKP10.111B17 |
SKP10.111B27 |
单段火打开和关闭;一个辅助转换开关 |
|
SKP13.111B27 |
SKP10.123B17 |
SKP10.123B27 |
二段或打开和关闭;2个限位开关,一个辅助转换开关 | |
技术参数 |
主要参数 |
主要电压 |
AC220V -15%...AC240V +10% |
|
AC100V -15%...AC110V +10% |
主频率 |
50...60Hz ±6% |
功率 |
20VA |
辅助开关 |
6A,AC240V |
辅助开关设置范围 |
4...96% |
全部开启时间 |
6...12s |
关闭时间 |
<1s |
保护等级 |
IP54 |
重量 |
|
带壳 |
1250g |
不带壳 |
1650g | | |
环境条件 |
运输环境 |
IEC 721-3-2 |
内部条件 |
class 2K2 |
机械条件 |
class 2M2 |
温度范围 |
-15...+60ºC |
湿度 |
<95% |
运行环境 |
IEC 721-3-3 |
内部条件 |
class 3K5 |
机械条件 |
class3M2 |
温度范围 |
-15...+60ºC |
湿度 |
<95% |
不得进水 | | | |
|